authentic stories from the frontlines of grass-fed
perfect steak cooking chart How to cook tender, juicy grass-fed steak every time, and a steak cooking chart

For most aspiring chefs and backyard grillmasters, there is sometimes a brief moment of trepidation before cooking a steak. The coals of the grill are red-hot, and you unwrap a beautiful prime rib or filet mignon that you’ve let sit at room temperature, then, you pause and think: “How do I not screw this up.” 

Buying the perfect steak and actually executing the process of cooking the perfect steak are two entirely different things. 

We’ve shared some of our favorite recipes and methods of cooking beef, but we haven’t discussed doneness very often. Here are some guidelines to help you cook a tender, juicy steak every time so you won’t have to have that moment of pre-cooking worry ever again.

From our perspective, the perfect level of doneness for a steak is medium-rare. For most cuts of beef, cooking to this level makes for tender, juicy meat that melts in your mouth. When it comes to grass-fed beef, medium-rare is ideal as well because grass-fed meat becomes tougher and dryer cooked to a higher internal temperature.

Grass-fed recommendations

Because grass-fed, grass-finished beef has less fat than conventional beef, it can easily be overcooked. The American Grassfed Association suggests that grass-fed beef is “ideal at rare to medium-rare temperatures.”

According to the USDA recommendations, beef should be cooked to an internal temperature of 145 degrees for medium doneness. The ideal internal temperature is 125 degrees for rare and 135 degrees for medium-rare for beef. You can check the temperature with a meat thermometer or other cooking thermometer right on the grill or in the oven.

The USDA recommends letting steak rest for three minutes to finish cooking, but our Head ButcherBox Chef, Yankel Polak, thinks it is better to let a cut of beef sit for about eight or 10 minutes to finish cooking. Letting beef rest before cutting will allow a steak cook more evenly and keep its juices.

Because beef still cooks during the resting period, the American Grassfed Association suggests removing a steak when it is five to 10 degrees cooler than the temperature you are trying to achieve. As the beef continues cooking at room temperature while off a heat source, it will reach the expected internal temperature after the rest period.

The Grassfed Association also says that if you prefer meat well-done, grass-fed and grass-finished beef can be cooked longer at a low temperature. The also suggest cooking with or in a sauce to add moisture to more well-done cuts of beef.

Grass-fed beef cooks 30 percent faster than conventional grain-fed beef, so you need to be paying attention while grilling or roasting. There is nothing worse than ruining a delicious cut of grass-fed meat by cooking it incorrectly.

Specifics on cooking beef cuts

While the recommendations on getting the right level of doneness can be measured using an instant-read thermometer, the tricks for getting the perfect steak have more to do with cooking methods, cooking temperatures, and a few other factors.

First, you should have an understanding of where the cut of beef comes from on a cow. Differences in cut from various sections of a cow — know as “primals” — play a key role in how a steak cooks. Ribeye steaks, filet mignon, and strip steaks all come from sections that get less usage. This is why they are so naturally tender.

These steaks are best seared and then cooked with dry heat. You can sear them in a pan and then roast or broil them in the oven, or, brown them on a gas grill on high heat or over red-hot charcoals and then move to a cooler section where they will cook from indirect heat.

For example, Chef Yankel recommends that for a New York strip steak, you should cook for four to five minutes per side on the hot part of a gas or charcoal grill, and then move to a cooler section for two to three minutes for each side. This will result in a delicious, medium-rare steak.

Other cuts of beef, especially those that come from the area of a cow that get more use, are often less tender and need to be marinated before being grilled or slow-cooked. This is especially true of flank steaks, skirt steaks, brisket, or hanger steaks. These steaks benefit from longer cooking times and spices, rubs, and marinades to be more tender. Another key for these types of steak is making sure they are cut correctly.

For beef roasts, you should follow the USDA internal temperature guidelines or cook to a temperature that you are comfortable with. The chart below has some suggested cooking times for roasts.

USDA recommendations for other cuts and types of meat

The reason that meat temperature guidelines exist is to make sure that any bacteria that may be on the surface of a steak or roast are eliminated. An external temperature of 160 degrees will do the job. Any harmful bacteria, like E. coli, is only found on the surface of meat, so a 145-degree internal temperature for medium is safe. Whether grilling or roasting, the external temperature threshold is easily achieved to get the recommended internal temperature.

USDA has a different guideline for ground beef, which they suggest cooking to an internal temperature of 160 degrees for medium doneness. Ground beef has more surface area that can be contaminated as opposed to a larger, single cut.

The 145 degrees internal temperature for beef steak and roasts is the same internal temperature the USDA suggests for pork, veal, lamb chops, and roasts. For ham, the suggestion is 145 degrees as well with the same three-minute resting period.

For chicken, turkey and other poultry — chicken or turkey breasts, a whole bird, legs, thighs, wings, ground poultry, and stuffing — the USDA recommendation is that the meat is cooked to an internal temperature of 165 degrees. The best place to check the temperature of a whole bird is the thickest part of its thigh, but you need to make sure that you are not touching any bone. The bone can be either much hotter or much cooler than the surrounding meat based on how long it has been cooking, which will give an inaccurate temperature.

SeeOurPlans2

Below is a meat and steak cooking chart from FoodSafety.org that gives more details of the recommendations and cooking times:

 

Type                       

Oven °F

Timing

Minimum Internal Temperature & Rest Time

 

Beef, rib roast, bone-in; 4 to 8 lbs

     325

 23 to 30 min/lb

145°F and allow to rest for at least 3 minutes

Beef, rib roast, boneless; 4 lbs

325

39 to 43 min/lb

Beef, eye round roast; 2 to 3 lbs

325

20 to 22 min/lb

Beef, tenderloin roast, whole; 4 to 6 lbs

425

45 to 60 minutes total

Beef, tenderloin roast, half; 2 to 3 lbs

425

35 to 45 minutes total

POULTRY: Times are for unstuffed poultry. Add 15 to 30 minutes for stuffed birds. The internal temperature should reach 165 degrees in the center of the stuffing.

Turkey, whole

325

30 min/lb

165°F and check the internal temperature in the innermost part of the thigh, innermost part of the wing and the thickest part of the breast.

Chicken, whole; 4 to 8 lbs

375

20 to 30 min/lb

Capon, whole; 4 to 8 lbs

375

20 to 30 min/lb

Cornish hens, whole; 18 to 24 oz.

350

50 to 60 minutes total

Duck, domestic, whole

375

20 min/lb

Duck, wild, whole

350

18 to 20 min/lb

Goose, domestic or wild, whole

325

20 to 25 min/lb

Pheasant, young, whole, 2 lbs

350

30 min/lb

Quail, whole

425

20 minutes total

LAMB

Lamb, leg, bone-in; 5 to 9 lbs

Lamb, leg, boneless; 4 to 7 lbs

325

20-26 min/lb

145°F and allow to rest for at least 3 minutes

Lamb, crown roast; 3 to 4 lbs

375

20-30 min/lb

PORK, FRESH

Pork, loin roast, bone-in; 3 to 5 lbs

325

20-25 min/lb

145°F and allow to rest for at least 3 minutes

Pork, loin roast boneless; 2 to 4 lbs

325

23-33 min/lb

Pork, crown roast; 6 to 10 lbs

325

20-25 min/lb

Pork, tenderloin; ½ to 1½ lbs

425

20-30 minutes total

PORK, CURED

Ham, cook-before-eating, bone-in; whole, 14 to 16 lbs

325

18-20 min/lb

145°F and allow to rest for at least 3 minutes

Ham, cook-before-eating, bone-in; half, 7 to 8 lbs

325

22-25 min/lb

Ham, fully cooked, bone-in; whole, 14 to 16 lbs

325

15-18 min/lb

140°F

Ham, fully cooked, bone-in; half, 7 to 8 lbs

325

18-25 min/lb

140°F

Ham, fully cooked, boneless; 3 to 4 lbs

325

27-33 min/lb

140°F

VEAL

Veal, boneless roast, rump or shoulder; 2 to 3 lbs

325

25-30 min/lb

145°F and allow to rest for at least 3 minutes

Veal, bone-in roast, loin; 3 to 4 lbs

325

30-34 min/lb